DPF Regeneration Machine

DPF Master Flash Professional PLUS

The highest quality device for regeneration of DPF/FAP/GPF/SCR filters, and catalysts. Made entirely of stainless steel AISI 304 and acid resistant AISI 316, dedicated to all types of vehicles. The machine has a double tank capacity of 275 litres, a pressure pump capacity of up to 250 l/min and an integrated filter drying system.

Customize your machine

DEVICE DESCRIPTION:

Italian pump with a chemical seal, resistant to the contamination, and electronics, based on components from the leading European manufacturers, guarantee the highest quality, and reliability of the device. The machine can measure counter-pressure, and has an integrated filter drying system, which can blow air of the temperature 158-266°F. The filtration system extended with a pre-filter, allows for a significant extension of the main filters service life. The device can operate in automatic or manuall mode, what allows the owner to use the selected option independently. The hydrodynamic method used in combination with the unique, dedicated XPOWER DPF CLEANER chemistry, removes residues of PM10, PM2.5 particles, oil, cerium, and heavy metals without mechanical interference in the filter structure, and allows to restore its factory efficiency in 99.8%.

ADDITIONAL OPTIONS:

automatic filter cleaning on both sides
second fluid circuit with additional pump
thermal insulation of the liquid tank
automatic fluid refill
quick-X filter clamping system

Record-breaking return on investment

Thanks to the combination of the best price/quality ratio, attractive forms of financing, and the highest efficiency on the market, you will pay off the leasing instalment after only 2 services – the next ones are your pure profit!

EQUIPMENT

7″ colour touch screen
sensors: liquid level, liquid and air temperature, pressure flow, door opening, phase loss and phase sequence
protections: safety switch, chamber door end protection, phase loss, and phase sequence
filter contamination measurement system
stainless steel AISI 316 chamber
extensive 4 stage liquid filtration system
two heaters
integrated drying system with smooth temperature range from 158 to 266°F
cooling of the drying system
integrated thermal printer for printing the filter parameters
Ethernet controller for remote diagnostics
set of adapters for DPF / FAP / GPF / KAT / SCR filters
EURO5 and EURO6 adapter
starter kit for consumables (filter set + 2L of detergent XPOWER DPF Cleaner)
liquid tank with capacity up to 275 litres
extended 12-month manufacturer’s warranty (optionally 24, 36 or 48 months)

DPF Master Flash Professional PLUS- device for DPF regeneration

Best choice for DPF regeneration business

90% of filters regain their factory parameters. In cooperation with the regeneration center, we conducted measurement tests of filters cleaned by the DPF Master Flash machine.

400% increased efficiency of the filter cartridges. Thanks to the application of the four-stage liquid filtration system and the pre-filter we extended the life of inserts even by 400%

A special machine control system, allows extending the work of one of the most expensive elements of the machine, which allows saving over 1000 EUR within 2 years.

20 minutes – average duration of DPF filter regeneration process. We have calculated the average regeneration time which takes about 20 minutes (not including the drying process).

It takes only 10 seconds to connect the filter. The innovative QuickX system makes the time of connecting the device fittings to the filter much shorter than in the case of a traditional installation.

The cost of regeneration of 1 particulate filter is less than 5 EUR. Average price of the offered services of cleaning the DPF passenger cars on the market estimated profit is 70-125 EUR net.